当前位置: 首页 > 文章 > 手扶便携式插秧机数字建模及运动仿真研究 农机化研究 2015 (4) 27-31
Position: Home > Articles > The Digital Modeling and the Motion Simulation of the Hand-held Portable Rice Transplanter Journal of Agricultural Mechanization Research 2015 (4) 27-31

手扶便携式插秧机数字建模及运动仿真研究

作  者:
徐高飞;胡光忠;程鹏飞;向荣磊;郑银河
单  位:
四川理工学院机械工程学院
关键词:
手扶插秧机;数字样机;运动仿真
摘  要:
针对丘陵和山地开发便携式插秧机已成为农业机械化的重要课题。为此,研制了一种新型手扶便携式插秧机,采用轻量化设计,无需其他动力源。同时,详细论述了该插秧机的工作原理,用SolidWorks Motion软件进行数字样机建模,并通过SolidWorks Motion仿真插件对手扶式插秧机进行运动仿真研究。仿真结果表明,该插秧机插秧深度为30cm,最佳牵引速度为0.73m/s,需要工作牵引力为26.57N。
译  名:
The Digital Modeling and the Motion Simulation of the Hand-held Portable Rice Transplanter
作  者:
Xu Gaofei;Hu Guangzhong;Cheng Pengfei;Xiang Ronglei;Zheng Yinhe;Department of Mechanical Engineering,Sichuan Science and Engeneering University;
关键词:
hand-held rice transplanter;;the digital prototype;;the motion simulation
摘  要:
Developing the portable rice transplanter in the light of the hills and mountain area has been an important subject that makes the agriculture mechanization. The paper develop a new portable rice transplanter that designed lightweight,and that without other powers. The paper discussed in detailed the working principle of rice transplanter and used the SolidWorks to establish the digital prototype and therefore through the SolidWorks Motion a plug-in unit of simulation to do the research of motion simulation of the rice transplanter. The research indicate that the depth of transplanting is 30 cm,and the best speed of dragging is 0. 73 m / s,and the strength of dragging is 26. 57 N.

相似文章

计量
文章访问数: 7
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊