Position: Home > Articles > Study on 200 kN Multi-point Forming Press and Its Theoretical Error of Adjusting Forming
Transactions of the Chinese Society for Agricultural Machinery
2006,37
(2)
114-117
200kN板材多点成形压力机及其调形的理论误差
作 者：
于力;付文智;付潍坊
单 位：
吉林大学机械科学与工程学院;吉林大学辊锻工艺研究所
关键词：
多点成形压力机;板材;理论误差
摘 要：
阐述了200kN快速调形多点成形压力机主要技术参数及快速调形原理,分析了调形精度对成形件质量的影响。论述了调形的理论误差及产生误差的原因,并对冲头的调形误差进行了检测,实际测试结果均在设计误差范围内,满足多点成形压力机的使用要求。
译 名：
Study on 200 kN Multi-point Forming Press and Its Theoretical Error of Adjusting Forming
作 者：
Yu Li Fu Wenzhi Fu Weifang (Jilin University)
关键词：
Multi-point forming press, Sheet metal, Theoretical error
摘 要：
Main technological forming parameters, rapid adjusting principle and characteristics of 200 kN rapid adjusting multi-point forming (MPF) press for sheet metal were introduced. Influences of adjusting forming precision on forming parts were analyzed in detail. Theoretical error, and the reasons were stated from several aspects. Adjusting displacement error, in compare with aim displacement that the element move to displacement of five elements in multi-point forming press was tested, all testing results was in the range of designing precision, and met the demand of multi-point forming press.
相似文章
-
100kN多点成形压力机及分段成形工艺研究 [付文智, 李明哲, 刘纯国, 裴永生, 孙刚] 农业机械学报 2003,34 (5) 186-188
