中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 手持式精准立木树高测量装置设计与试验 农业机械学报 2018 (12) 129-134
Position: Home > Articles > Design of Handheld Precision Standing Tree Height Measurement Device Transactions of the Chinese Society for Agricultural Machinery 2018 (12) 129-134

手持式精准立木树高测量装置设计与试验

作  者：
刘海洋;冯仲科;呼诺;刘金成;于新文
单  位：
北京林业大学精准林业北京市重点实验室;中国林业科学研究院资源信息研究所
关键词：
树高;测量设备;手持式;精准测量
摘  要：
为解决森林资源调查中树高测量误差大,复杂林分环境树高测量难,倾斜立木树干长度测量不准等问题,以测量学、测树学、电子信息技术、传感器技术和图像处理技术为基础,研制了手持式精准立木树高测量装置。该装置集成了中央处理器、激光测距仪、高清摄像头、高精度陀螺仪传感器、液晶显示屏、存储器等元器件,利用激光测距传感器获取测量装置与被测树根间的距离,同时获取该装置的仰角信息,再利用图像中心确定树顶位置后获取第2个仰角信息,通过距离信息和角度信息解算测量树高。使用设备贴紧树干测量树干倾斜角度,对于干型弯曲的树木,利用边缘检测算法识别图像树干轮廓边缘,以轮廓近似法提取树干轮廓边缘点,获得树干边缘离散点坐标信息,将线性拟合求得的直线斜率转换为树干倾斜角,利用角度补偿算法完成长势倾斜立木的树长测量。试验结果表明树高测量精度可达98. 04%,倾斜立木测量精度为96. 89%,满足国家森林资源调查的精度要求。
译  名：
Design of Handheld Precision Standing Tree Height Measurement Device
作  者：
LIU Haiyang;FENG Zhongke;HU Nuo;LIU Jincheng;YU Xinwen;Beijing Key Laboratory of Precision Forestry,Beijing Forestry University;Institute of Information Resources,Chinese Academy of Forestry;
单  位：
LIU Haiyang%FENG Zhongke%HU Nuo%LIU Jincheng%YU Xinwen%Beijing Key Laboratory of Precision Forestry,Beijing Forestry University%Institute of Information Resources,Chinese Academy of Forestry
关键词：
tree height;;measuring equipment;;handheld;;precision measurement
摘  要：
The object was to solve the problems of large tree height measurement errors in forest resources surveys,difficulties in measuring tree heights in complex forest stands,and measurement of the height of tilted stands, etc., and surveying, forest measurement, electronic information technology, sensor technology and image processing technology were focused on. Based on this,a handheld precision standing tree height measurement device was developed. The device consisted of a central processing unit,a laser range finder,a high-definition camera,a high-precision gyro sensor,a liquid crystal display,a memory and the like,and a laser-ranging sensor was used to obtain a distance between the measuring device and the root of tree,and the device was acquired at the same time. The elevation angle information was used to determine the position of the treetop after the image center was used to obtain the second elevation angle information, and the measurement tree height was solved by the distance information and the angle information. The equipment was used to measure the trunk inclination angle of the tree trunk. For the dry-bending trees,edge detection algorithm was used to identify the edges of the image trunk contour. Contour extraction method was used to extract edge points of the trunk contour,and coordinate information of the discrete points on the edge of the trunk was obtained to perform linear fitting. The slope of the straight line was converted to the angle of the trunk,and the angle compensation algorithm was used to complete the measurement of growth of trees with long slopes and standing trees.The test results showed that the tree height measurement accuracy can reach 98. 04%,and the inclined standing wood measurement accuracy was 96. 89%,which can meet the accuracy requirements of the national forest resource survey. The measuring method of tree height measurement device and the measuring method of high growth and volume of the inclined standing timber can provide new ideas for theresearch of forestry equipment.

相似文章

导出引用
计量
文章访问数: 9
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46