当前位置: 首页 > 文章 > 基于IRM和小波变换的圆度误差在线检测技术 农业机械学报 2009,40 (7) 212-216
Position: Home > Articles > Roundness On-machine Measurement Method Based on IRM and Wavelet Transform Transactions of the Chinese Society for Agricultural Machinery 2009,40 (7) 212-216

基于IRM和小波变换的圆度误差在线检测技术

作  者:
张玉梅;左春柽;李春芳
单  位:
吉林大学机械科学与工程学院
关键词:
圆度;在线检测;改进反向法;小波变换
摘  要:
针对提高圆度误差在线检测精度的两个关键问题——主轴回转误差分离和环境噪声消除,提出了一种基于IRM(改进反向法)和小波变换的圆度误差在线检测方法。运用IRM实现在线检测中主轴回转误差与圆度误差的分离;采用基于小波变换的消噪滤波方法,消除车间噪声和高、中频信息的干扰。实验结果表明,在线检测精度基本达到了三坐标机的离线检测精度,平均相对误差4%,重复测量精度基本一致。
译  名:
Roundness On-machine Measurement Method Based on IRM and Wavelet Transform
作  者:
Zhang Yumei1,2 Zuo Chuncheng1 Li Chunfang1(1.College of Mechanical Science and Engineering,Jilin University,Changchun 130025,China2.Department of Vocational Education,Chifeng University,Chifeng 024000,China)
关键词:
Roundness,On-machine measurement,IRM,Wavelet transform
摘  要:
Aiming at solving two key problems namely main shaft movement error(MSME) separation and the signals' denoising existing in improving the measurement accuracy of the roundness on-machine measurement,a new roundness on-machine measurement method was proposed.In this method,the improved reverse method(IRM) was introduced to minimize the influence of the MSME on the roundness error.Wavelet transform based denoising technique was applied to separate the noise and the high frequency components from the roundness signals.The experimental results show that the measurement accuracy of the proposed method nearly reaches that of the coordinate measuring machine,the relative error is 4% on average, and the repeatability is nearly the same.

相似文章

计量
文章访问数: 7
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊