当前位置: 首页 > 文章 > 集材绞盘机新型摩擦卷筒试验与仿真分析 福建农林大学学报(自然科学版) 2016,45 (5) 611-616
Position: Home > Articles > Design and simulation analysis on a new friction drum of forest yarder Journal of Fujian Agriculture and Forestry University(Natural Science Edition) 2016,45 (5) 611-616

集材绞盘机新型摩擦卷筒试验与仿真分析

作  者:
吴传宇;周成军;周新年;张正雄;张火明;林敏
单  位:
福建农林大学交通与土木工程学院;福建省漳平五一国有林场
关键词:
绞盘机;摩擦卷筒;V型环槽;模型试验;摩擦系数
摘  要:
针对传统摩擦卷筒牵引力较小的缺点,进行力学和仿真分析及模型试验研究,结果表明:将集材绞盘机牵引卷筒设计成带V型环槽的摩擦卷筒,可以显著提高当量摩擦系数和集材牵引力,从而取代缠绕卷筒,大大减小卷筒结构尺寸,实现绞盘机轻型化;摩擦卷筒牵引力的大小与V型环槽的楔角成反比.通过二次拟合建立摩擦卷筒V型槽楔角与牵引力关系的经验公式.
译  名:
Design and simulation analysis on a new friction drum of forest yarder
作  者:
WU Chuanyu;ZHOU Chengjun;ZHOU Xinnian;ZHANG Zhengxiong;ZHANG Huoming;LIN Min;College of Transportation and Civil Engineering,Fujian Agriculture and Forestry University;Zhangping Wuyi State-Owned Forestry Farm in Fujian Province;
关键词:
yard;;friction reel;;V-ring groove;;model test;;friction coefficient
摘  要:
To solve the problem of traditional yarder that is low in traction,a V-shaped groove was modified to friction roll based on mechanical analysis,and followed by simulation test to optimize the parameters for best performance. Result indicated the V-shaped groove increased the equivalent friction coefficient and traction of friction roll significantly. Traction was inversely proportional to the angle of V-shaped wedge,based on which an empirical equation between them was established according to quadratic fitting method.In conclusion,with smaller volume and lighter,weight V-shaped groove is likely to be an excellent alternative to traditional twined roll.

相似文章

计量
文章访问数: 10
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊