当前位置: 首页 > 文章 > 拖拉机中央传动弧齿锥齿轮的有限元分析 拖拉机与农用运输车 2012,39 (2) 16-18
Position: Home > Articles > Finite Element Analysis of Spiral Bevel Gear on Tractor Center Drive Tractor & Farm Transporter 2012,39 (2) 16-18

拖拉机中央传动弧齿锥齿轮的有限元分析

作  者:
王维;吕新民;徐清俊
单  位:
西北农林科技大学机械与电子工程学院;陕西省农业装备工程技术研究中心;中国一拖集团有限公司
关键词:
拖拉机;弧齿锥齿轮;Pro/E;ANSYS;有限元分析
摘  要:
采用Pro/E软件,建立了拖拉机中央传动弧齿锥齿轮的参数化精确模型,利用Pro/E与ANSYS接口将建模实体导入ANSYS软件中进行了有限元计算和分析。结果表明,ANSYS对啮合理论问题分析结果比传统计算公式更加接近实际。该方法可定量分析其应力分布情况,为弧齿锥齿轮的研究、设计、制造进行了理论和技术探索。
译  名:
Finite Element Analysis of Spiral Bevel Gear on Tractor Center Drive
作  者:
WANG Wei1,LV Xin-min1,2,XU Qing-jun3(1.College of Mechanical and Electronic Engineering,Northwest A&F University,Yangling 712100,China; 2.Shaanxi Engineering Research Center for Agricultural Equipment,Yangling 712100,China; 3.YTO Group Corporation,Luoyang 471004,China)
关键词:
Tractor;Spiral bevel gear;Pro/E;ANSYS;Finite element analysis
摘  要:
Based on Pro/E software,the paper created a 3D solid model of spiral bevel gear accurately,then leaded the model to ANSYS by connecting Pro/E and ANSYS software.The finite element calculation and analysis were performed in ANSYS software.The results show that,for engagement theory,the analysis conclusion of ANSYS software is more close to actual situation than that of traditional method.The method can quantificationally analyze the stress distribution,and which can provide a theoretical and technical support for spiral bevel gear's design and manufacturing.

相似文章

计量
文章访问数: 8
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊