当前位置: 首页 > 文章 > 大钩叶藤与玛瑙省藤材的主要物理力学性质对比 东北林业大学学报 2014 (12) 123-125+129
Position: Home > Articles > Physical and Mechanical Properties of Plectocomia assamica Grift and Calamus manna Journal of Northeast Forestry University 2014 (12) 123-125+129

大钩叶藤与玛瑙省藤材的主要物理力学性质对比

作  者:
尚莉莉;刘杏娥;吕黄飞;江泽慧;杨淑敏;田根林
单  位:
安徽农业大学;国际竹藤中心
关键词:
大钩叶藤;玛瑙省藤;基本密度;抗弯性能;抗压性能
摘  要:
以大钩叶藤材为研究对象,测得其基本密度值为0.302 1 g/cm3,抗压强度值为16.92 MPa,抗弯弹性模量和抗弯强度分别为124.43 MPa和20.46 MPa。并将其与玛瑙省藤材进行比较,以期为大钩叶藤材商业化利用提供基础数据。结果表明,大钩叶藤材的材性较差,直接应用不能满足商业化利用的要求,需对其进行改性研究。
译  名:
Physical and Mechanical Properties of Plectocomia assamica Grift and Calamus manna
作  者:
Shang Lili;Liu Xin'e;Lü Huangfei;Jiang Zehui;Yang Shumin;Tian Genlin;International Centre for Bamboo and Rattan;Anhui Agricultural University;
关键词:
Plectocomia assamica Grift;;Calamus manan;;Basic density;;Bending property;;Compression property
摘  要:
With Plectocomia assamica Grift,we determined the value of basic density of 0. 302 1 g / cm3,the compressive strength of 16. 92 MPa,the bending modulus and bending strength of 124. 43 and 20. 46 MPa,respectively. All these properties were compared with Calamus manan,we provided an effective way for commercial utilization of P. assamica.The properties of P. assamica material are poor,and direct application cannot meet the commercial utilization requirements,so P. assamica needs modification.

相似文章

计量
文章访问数: 17
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊