Position: Home > Articles > Dynamic Analysis of Fertilization Mechanism Based on ADAMS and ANSYS
Journal of Agricultural Mechanization Research
2010,32
(11)
21-24
基于ADAMS&ANSYS的施肥机构仿真分析
作 者：
范雨杭;杨坚;梁兆新;梁忠山;刘增汉;郑智嵘;周仕城
单 位：
广西农业机械研究院;广西大学机械工程学院
关键词：
甘蔗中耕施肥;应力集中;仿真;疲劳断裂
摘 要：
以3ZFS-1型甘蔗中耕施肥机为原型,建立了施肥机构的虚拟样机,对其精度进行了验证。通过对虚拟样机的动力学仿真,分析了施肥机构的应力变化以及主动轴易损坏的原因,并对主动轴进行疲劳寿命估算,进而提出解决措施。
译 名：
Dynamic Analysis of Fertilization Mechanism Based on ADAMS and ANSYS
作 者：
Fan Yuhang1,Yang Jian1,Liang Zhaoxin2,Liang Zhongshan1,Liu Zenghan1,Zheng Zhirong1,Zhou Shicheng1 (1.Mechanical Engineering Faculty,Guangxi University,Nanning 530004,China;2.Guangxi Zhuang Autonomy Research Institute of Agricultural Machinery,Nanning 530001,China)
关键词：
fertilizer applicator;stress concentration;simulation;fatigue fracture
摘 要：
A virtual prototype model of the fertilization mechanism was built modeling with the 3ZFS-1 sugarcane intertillage fertilizer applicator,tested and analysed the precision of the model.Through the dynamic simulation of the virtual prototype model,the stress change of fertilization and the reasons of driving shaft fracture were analyzed,and the fatigue life of the driving shaft was estimated,measure was put forward.
导出引用
计量
文章访问数: 7
HTML全文浏览量: 0
PDF下载量: 0
所属期刊
