当前位置: 首页 > 文章 > 履带拖拉机前梁焊合件仿真分析 拖拉机与农用运输车 2011,38 (6) 42-43+48
Position: Home > Articles > Simulation of Front Welding Beam of Crawler Tractor Tractor & Farm Transporter 2011,38 (6) 42-43+48

履带拖拉机前梁焊合件仿真分析

作  者:
孙天龙;王新一;杨彦朋
单  位:
中国一拖集团有限公司第一装配厂;洛阳拖拉机研究所有限公司
关键词:
履带拖拉机;三维仿真技术;结构分析
摘  要:
针对东方红-C1402履带拖拉机水温过高问题,在相应位置设计通风孔,改进前梁焊合件结构,使冷却空气及时排出。利用Pro/E三维仿真技术平台,对前梁合件在整机工作过程中的受力变化情况进行分析,找出工况最差时受力点的大小及方向。利用该力对改进后的前梁焊合件进行结构分析,得出仿真技术在履带拖拉机中应用的优势。
译  名:
Simulation of Front Welding Beam of Crawler Tractor
作  者:
SUN Tian-long1,WANG Xin-yi1,YANG Yan-peng2(1.First Assembly Factory,YTO Group Corporation,Luoyang 471004,China; 2.Luoyang Tractor Research Institute Co.,Ltd.,Luoyang 471039,China)
关键词:
Crawler tractor;Three-dimensional simulation technology;Structure analysis
摘  要:
Aiming at the problem that water temperature of YTO-C1402 crawler tractor was excessively high,we designed ventilation holes on the responding position,improved the structure of front welding beam,and made the cool air flow smoothly.Using Pro/E three-dimensional simulation,we also analyzed load conditions variation in the processing of working,found the size and direction of load point at the worst working condition.The load condition was used to analyze structural component after improvement,it was concluded that simulation technology had advantages in the application of crawler tractors.

相似文章

计量
文章访问数: 21
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊