中国农业期刊集成服务平台

当前位置: 首页 > 文章 > Automatic depth control system for a no-till seeder 国际农业与生物工程学报 2018,11 (1)

Position: Home > Articles > Automatic depth control system for a no-till seeder International Journal of Agricultural and Biological Engineering 2018,11 (1)

Automatic depth control system for a no-till seeder

作者：

Jiale Zhao;Longtu Zhu;Jia Hu;Dongyan Huang;Mingzhuo Guo;Yongjiang Con

单位：

2. Key Laboratory of Bionics Engineering, Ministry of Education, Jilin University, Changchun 130025, China; Key Laboratory of Bionics Engineering, Ministry of Education.; 2. Key Laboratory of Bionics Engineering, Ministry of Education, Jilin University, Changchun 130025, Chin;1. College of Biological and Agricultural Engineering, Jilin University, Changchun 130025, China;College of Biological and Agricultural Engineering, Jilin University

关键词：

no-till seeder;sowing depth;control system;polyvinylidene fluoride (PVDF) film;sensor;PART 1;SOIL;PERFORMANCE;DESIGN;CROP;EMERGENCE;INJECTIO

摘要：

Sowing depth has an important impact on the performance of a no-till seeder. The seeds should be placed at optimal depth for rapid germination and emergency. To compensate the spatial variation in soil type and conditions, an automatic depth control system was designed, which consisted of a deformation sensor, an actuator and a controller. The deformation sensor was made of polyvinylidene fluoride (PVDF) film, which was fixed on the inner surface of the gauge wheel, and the output voltage was determined by the deformation of the wheel. Two models of the PVDF sensor with a tiled shape and an arched shape were set up to analyze the relationship between the output signal and the wheel deformation. In the experiments, the relationship between the output voltage and gauge wheel deformation was obtained, and the results were in accord with the model analysis results. The voltage of both sensors increase with the augment of deformation, the arched sensor was more sensitive than the tiled one. The arched sensor embedded in the control system was able to maintain the desired seeding depth within tolerance +/- 8 mm at driving speed of 2.78 m/s, which can satisfy the agronomic requirements for the no-till seeder.

相似文章

Seed Zone Properties and Crop Performance as Affected by Three No-Till Seeders for Permanent Raised Beds in Arid Northwest China [He Jin, Li Hong-wen, McHugh, Allen David, Wang Qing-jie, Li Hui, Rasaily, Rabi Gautam, Sarker, Khokan Kumer] 农业科学学报 (英文) 2012,11 (10)
Seed Zone Properties and Crop Performance as Affected by Three No-Till Seeders for Permanent Raised Beds in Arid Northwest China [Jin He, Hongwen Li, A. D. McHugh, Qingjie Wang, Hui Li, Rabi G. Rasaily, Khokan Kumer Sarke] 农业科学学报(英文版) 2012,11 (10)
Anti-blocking performance of ultrahigh-pressure waterjet assisted furrow opener for no-till seeder [Hongnan Hu, Hongwen Li, Qingjie Wang, Jin He, Caiyun Lu, Yingbo Wang, Peng Li] 国际农业与生物工程学报 2020,13 (2)

导出引用

计量

文章访问数: 17

HTML全文浏览量: 0

PDF下载量: 0

Automatic depth control system for a no-till seeder

相似文章

所属期刊

国际农业与生物工程学报

推荐期刊

农业科学学报 (英文)