中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > Design and experiment of multi-row pneumatic precision metering device for rapeseed 国际农业与生物工程学报 2018,11 (5)
Position: Home > Articles > Design and experiment of multi-row pneumatic precision metering device for rapeseed International Journal of Agricultural and Biological Engineering 2018,11 (5)

Design and experiment of multi-row pneumatic precision metering device for rapeseed

作  者：
Elebaid Jabir Ibrahim;Quan Liao;Lei Wang;Yitao Liao;Yao L
关键词：
precision seeder;metering device;performance;pneumatic;disk;multi-rows;rapeseed;OPERATIONAL PARAMETERS;SEED DRILL;OPTIMIZATION;SIMULATION;UNIFORMITY;SYSTEM;PLATE;UNI
摘  要：
The main objective of this study was to design a pneumatic disk with four-rows for planting rapeseed and to investigate its performance under several rotating speeds and vacuum pressure values. The effects of rotating speeds, vacuum pressure and rows on seed sucking and retaining were inspected. Six rotating speeds (5 r/min, 10 r/min, 15 r/min, 20 r/min, 25 r/min and 30 r/min) incorporated with the application of vacuum pressure were employed for detecting the optimum vacuum amount that was sufficient for seed sucking under each speed. These values of vacuum were found to be 1.1 kPa, 1.25 kPa, 1.35 kPa, 1.65 kPa, 1.8 kPa and 2.0 kPa, respectively. Moreover, a regression model was developed for predicting of vacuum pressure that corresponds with each rotating speed. Based on seed mass analysis, statistical differences were found at 5% significance under the influence of speeds and negative pressure and existed also between and within rows according to Duncan's Test. The highest seed mass means of 3.17 g and 3.96 g were obtained by row 1 under the effects of speed and vacuum pressure, respectively, while the lowest means of 2.79 g and 3.05 g were attained by row 4. Due to the influence of rows, important differences were occurred between row 1 (closer to the center of rotation) and row 4 (farther one), particularly under high speeds (25 r/min and 30 r/min). Results concluded that, pneumatic disk with multiple-rows could be satisfactorily used for seed sowing with a little variation in seed amount between rows without any seed damage. The rows of hole farther from plate center of rotation were obviously influenced by angular velocity and vacuum amount rather than the closer ones.

相似文章

导出引用
计量
文章访问数: 23
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46