Position: Home > Articles > Flexural and Thermal Expansion Properties of Core-shell Structure Wood Polymer Composites
Journal of Zhejiang Forestry Science and Technology
2014
(6)
40-44
共挤出型芯—表结构木塑复合材料弯曲性能与热膨胀性能的研究
作 者：
黄润州;冒海燕;KIM Brimjune;WU Qinglin
单 位：
美国路易斯安那州立大学再生资源学院;南京林业大学材料科学与工程学院;韩国国民大学林业与生物技术系
关键词：
芯—表结构;木塑复合材料;热膨胀;弯曲
摘 要：
以改性玻璃纤维(GF)为表层的增强材料,以共挤出技术为加工工艺,制备了芯-表结构的木塑复合材料,分析了其在芯层1和芯层2两种复合体系下的弯曲和热膨胀性能。结果表明:当表层GF加入量为0时,即为表层为纯高密度聚乙烯(HDPE)时,无论是在芯层1还是芯层2的复合体系,芯—表结构木塑复合材料的线性热膨胀系数(LTEC)高于芯层材料,其弯曲模量和弯曲强度均小于芯层材料;芯—表结构木塑复合材料(GF增强表层)的弯曲强度、模量随着表层GF加入量的增加而增加;芯—表结构木塑复合材料的热膨胀性能是表层和芯层性能共同作用的结果,在表层加入GF后,其表层材料的热膨胀系数和芯—表结构木塑复合材料同时降低,且降低趋势相近。
译 名：
Flexural and Thermal Expansion Properties of Core-shell Structure Wood Polymer Composites
作 者：
HUANG Run-zhou;MAO Hai-yan;KIM Brimjune;WU Qing-lin;College of Materials Science and Engineering, Nanjing Forestry University;School of Renewable Natural Resources, Louisiana State University;Department of Forest Products &Biotechnology, Kookmin University;
关键词：
core-shell structure;;wood polymer composites;;thermal expansion;;flexural
摘 要：
Experiments were conducted on different modified glass fiber(GF) content on flexural and thermal expansion performance of core-shell structure wood polymer composite(WPC) with GF-filled shells. The result demonstrated that WPC with pure high-density polyethylene(HDPE) shell had higher linear thermal expansion coefficient(LTEC) than the core's, but had lower bending modulus and strength. Bending modulus and strength of the composite increased but LTEC values decreased with increase of the GF loading levels in the shell. The experiments resulted that bending modulus/strength of core-shell structure WPC was greatly enhanced with unfilled- and filled HDPE shells.
导出引用
计量
文章访问数: 20
HTML全文浏览量: 0
PDF下载量: 0
所属期刊
