中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 仿蛇嘴咬合式柑橘采摘末端执行器设计与实验 农业机械学报 2018 (10) 54-64
Position: Home > Articles > Design and Experiment of Bite-model End-effector for Citrus Harvesting by Simulating with Mouth of Snake Transactions of the Chinese Society for Agricultural Machinery 2018 (10) 54-64

仿蛇嘴咬合式柑橘采摘末端执行器设计与实验

作  者：
王毅;许洪斌;张茂;马冀桐;刘波;何宇
关键词：
柑橘;采摘机器人;末端执行器;仿生学;咬合式;果柄倾角
摘  要：
提出了通过改进采摘机器人的末端执行器来实现未知柑橘果柄空间方位的柑橘采摘,以提高采摘机器人的采摘能力。对柑橘果柄生长情况进行了调研,定义了果柄倾角并进行了统计,对果柄极限位置的剪切要求进行了分析并得出了末端执行器的设计要求。根据蛇的咬合动作和蛇嘴骨骼的特殊结构,通过仿照蛇嘴结构设计咬合式末端执行器能够满足设计要求。对蛇头骨骼结构进行了简化,提出了两种设计思路,并据此分别设计了两种机构的初步模型,经过运动学分析确定了较优方案,并对初步模型进行了优化,确定了末端执行器的三维模型。根据三维模型建立了末端执行器的运动学模型,并进行了运动学分析和仿真,保证了机构设计合理。制造了咬合式末端执行器样机并通过课题组自行研制的柑橘采摘机器人进行了实验室环境和自然环境的实验验证。实验结果表明,在实验室环境下,果柄倾角为0°、气压为0.6 MPa、果柄直径不超过4.0 mm条件下的切断成功率不小于95%,不同果柄倾角的总体切断成功率为97.5%;在室外环境下,收获柑橘的总成功率为87.5%,基本实现了未知果柄空间方位下对柑橘的采摘。
译  名：
Design and Experiment of Bite-model End-effector for Citrus Harvesting by Simulating with Mouth of Snake
作  者：
WANG Yi;XU Hongbin;ZHANG Mao;MA Jitong;LIU Bo;HE Yu;College of Mechanical Engineering,Chongqing University;College of Mechanical Engineering,Chongqing University of Technology;
单  位：
WANG Yi%XU Hongbin%ZHANG Mao%MA Jitong%LIU Bo%HE Yu%College of Mechanical Engineering,Chongqing University%College of Mechanical Engineering,Chongqing University of Technology
关键词：
citrus;;harvesting robot;;end-effector;;bionics;;bite-model;;inclination of stem
摘  要：
Aiming to improve the picking ability of the harvesting robot,a bite-model end-effector for citrus was designed. The design requirements of the end-effector were obtained by first investigation of the growth of citrus stem,the inclination of the stem and doing statistics was defined,and the shearing requirements of the stem extreme position was lastly analyzed. That the design of the bite-model endeffector can meet the design requirements by simulating the snake mouth structure which followed the snake's biting action and the special structure of the snake's mouth bones. Two design ideas were proposed by simplifying the structure of the snakehead skeleton. Based on this,the initial model of the two kinds of mechanism was designed respectively. After the preliminary kinematics analysis,the optimal scheme was determined and the initial model was optimized,and the three-dimensional model of the endeffector was determined. According to the three-dimensional model,the kinematics model of the endeffector was established,and the kinematics analysis and simulation were carried out to ensure the reasonable design of the mechanism. A bite-model end-effector prototype was manufactured,and then it was verified by the citrus harvesting robot developed by the research group in laboratory and outdoor environment. In laboratory environment,the experimental results showed that the cutting success rate was not less than 95% under the condition that the air pressure was 0. 6 MPa,the inclination of the stem was0°,the stem diameter was no more than 4. 0 mm,and the overall cutting success rate for different stem inclinations was 97. 5%. The total success rate of harvesting citrus in the outdoor environment was87. 5%.

相似文章

导出引用
计量
文章访问数: 13
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46