中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 基于包络面构建的等残留高度刀具路径规划 农业机械学报 2009,40 (1) 217-221
Position: Home > Articles > Constant Scallop-height Tool Path Planning by Constructing Envelope Surface Transactions of the Chinese Society for Agricultural Machinery 2009,40 (1) 217-221

基于包络面构建的等残留高度刀具路径规划

作  者：
吴福忠
单  位：
绍兴文理学院工学院
关键词：
数控;刀具路径;自由曲面;等残留高度;刀具包络面
摘  要：
提出一种基于包络面构建技术的等残留高度刀具路径规划方法。在计算过程中,首先分别以残留高度值和刀具半径值为等距距离将被加工曲面进行等距,得到残留曲面和刀具中心曲面。然后以前一行刀具路径为引导线,构建截面半径等于刀具半径的包络面,通过包络面与残留曲面之间的求交计算,得到残留曲线;以残留曲线为引导线,再次构建包络面,包络面与刀具中心曲面之间的交线即为当前刀具路径行。依次递推,求出所有刀具路径行。最后针对可能出现的欠切问题,给出边界处理方法。通过实例验证了算法的可行性,并与现有算法进行比较,表明应用该方法生成三坐标自由曲面加工的刀具路径,可在保证加工精度的前提下,大大提高加工效率。
译  名：
Constant Scallop-height Tool Path Planning by Constructing Envelope Surface
作  者：
Wu Fuzhong(School of Engineering,Shaoxing College of Arts and Sciences,Shaoxing 312000, China)
关键词：
NC,Tool path,Free form surface,Constant scallop-height,Tool envelope surface
摘  要：
A constant scallop-height tool path planning method was presented based on envelope surface construction.Firstly,in the process of calculation,the machined surface was offset by the distance of tool radius and scallop-height respectively,then the scallop surface and the tool center surface were obtained.Then the envelope surface,whose section radius was equal to the tool's,was constructed along the last tool path.The scallop curve was obtained by the envelope surface intersection calculation with the scallop surface.The envelope surface was again constructed along the scallop curve.The adjacent tool path was the intersection line of the envelope surface and the tool center surface.All tool paths could be determined by recurring in turn.A method of boundary verification was described to avoid undercut.Finally the validity of present method was demonstrated by an example.The calculation results of the present method were compared with those of the existed algorithms.The results indicate that the machining precision and efficiency can be enhanced greatly with three-axis free form surface machining.

相似文章

导出引用
计量
文章访问数: 12
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46