当前位置: 首页 > 文章 > 卷盘式喷灌机卷盘驱动负载计算与分析 农机化研究 2015 (8) 70-73
Position: Home > Articles > Calculation and Analysis on Load of Hose Reel Irrigators Journal of Agricultural Mechanization Research 2015 (8) 70-73

卷盘式喷灌机卷盘驱动负载计算与分析

作  者:
顾哲;汤跃;汤玲迪;陈超
单  位:
江苏大学流体机械工程技术研究中心
关键词:
卷盘式喷灌机;软管牵引式;负载转矩;物理模型;数学模型
摘  要:
为优化卷盘式喷灌机驱动结构,研制高效卷盘喷灌机驱动器,需要对卷盘式喷灌机的卷盘负载情况进行计算和分析。为此,以软管牵引式卷盘喷灌机为对象,建立了卷盘负载转矩计算的物理模型,理论推导了在运行时的卷盘负载转矩数学计算模型。以JP50和JP75型卷盘式喷灌机为例,按推导所得数学模型进行计算,得到了运行时卷盘负载转矩随已回卷PE管长度的变化规律和估计值。计算结果表明:JP50型卷盘式喷灌机运行时最大负载转矩约为960N·m,JP75型为6 001N·m;卷盘负载转矩随已回卷长度的增加而减小,且当卷盘回卷半径变化时,负载转矩将突然变大;负载转矩的大小和变化规律只与喷灌机的参数和运行条件有关,与运行时的速度无关。
译  名:
Calculation and Analysis on Load of Hose Reel Irrigators
作  者:
Gu Zhe;Tang Yue;Tang Lingdi;Chen Chao;Research Center of Fluid Machinery Engineering and Technology,Jiangsu University;
关键词:
hose reel irrigator;;hose towed;;load torque;;physical model;;mathematical model
摘  要:
The calculation and analysis should be known before optimizing the structure of the drive of hose reel irrigators and developing a high efficiency driver. A physical reel load torque model was established and the mathematical model according to the physical model was derived for the reel towed hose reel irrigators. The calculation was carried out with the parameters of JP50 and JP75 hose reel irrigators based on the mathematical model. The result shows the operational reel load torque value and changing rules with the length of PE pipe that has rolled back,that is,the maximum load torque of operational hose reel irrigators is about 960N·m for JP50 and 6001N·m for JP75,the reel load torque decreases with the increase of PE length that has rolled back; the load torque will increase suddenly when the rollback radius changes. It is noted that the operational reel load torque under constant speed remain unchanged at different speed,known from the mathematical model,which also shows the relation between load torque and hose reel parameters and operational conditions.

相似文章

计量
文章访问数: 10
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊