当前位置: 首页 > 文章 > 车用催化转化器入口管结构改进模拟与试验 农业机械学报 2006,37 (9) 59-63
Position: Home > Articles > Experimental and Modeling Investigation of New Structure on Automobile Catalytic Converter Inlet Header Transactions of the Chinese Society for Agricultural Machinery 2006,37 (9) 59-63

车用催化转化器入口管结构改进模拟与试验

作  者:
梁昱;周立迎;龚金科;罗福强
单  位:
江苏大学汽车与交通工程学院;湖南大学机械与汽车工程学院;贵阳学院机电系
关键词:
催化转化器;入口管;结构设计;流场;数值模拟
摘  要:
利用催化转化器流场的二维模型对多种入口管结构的催化转化器流动分布和压力损失进行了数值计算,并提出一种组合型入口管。通过模拟与试验表明,与常规结构催化转化器相比,组合型入口管可明显改善流动均匀性,降低压力损失约1/4,提高催化转化器效率,延长使用寿命,减小对发动机动力性的影响,但起燃变慢。
译  名:
Experimental and Modeling Investigation of New Structure on Automobile Catalytic Converter Inlet Header
作  者:
Liang Yu1 Zhou Liying2 Gong Jinke3 Luo Fuqiang1 (1.Jiangsu University 2.Guiyang University 3.Hu'nan University)
关键词:
Catalytic converter, Inlet header, Structural design, Flow field, Numerical simulation
摘  要:
Based on a two-dimension model for the flow field in catalytic converter, the flow field and pressure loss in catalytic converter with different inlet headers are simulated. The experimental and simulation results show that using the improved structure of inlet header can greatly improve flow uniformity, decrease pressure loss, enhance the efficiency of TWC, attribute to prolonging the service life of the machine, and lessen the power decrease caused by TWC, but the light-off time of TWC is retarded.

相似文章

计量
文章访问数: 6
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊