中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 基于正交试验设计的气缸套变形研究 拖拉机与农用运输车 2016 (1) 45-48
Position: Home > Articles > Study on Cylinder Liner Deformation Based on Orthogonal Test Design Tractor & Farm Transporter 2016 (1) 45-48

基于正交试验设计的气缸套变形研究

作  者：
兰银在;陈泽忠;彭海雄;强智臻;李鹏;文洋;王晓滕
单  位：
中国北方发动机研究所(天津)
关键词：
正交试验设计;气缸套;变形;有限元法;柴油机
摘  要：
应用正交试验设计方法考察设计因素对柴油机气缸套变形的影响趋势和相互关系.选取螺栓预紧力、螺栓与气缸中心距离和螺栓孔下沉量作为考察因素,建立了气缸盖、气缸垫、气缸套和机体的组合有限元模型。基于正交试验设计法设计了16组计算方案,通过有限元分析,得出气缸套3个截面的变形和最小主应力结果,同时得到了以上3个因素对气缸套变形及受力的影响规律。结果表明,降低气缸套变形和最小主应力为优化目标时,选取合适的螺栓孔下沉量是最重要的优化目标;在保证气缸密封的前提下,适当降低螺栓预紧力;螺栓与气缸中心距离对优化目标影响最不明显。
译  名：
Study on Cylinder Liner Deformation Based on Orthogonal Test Design
作  者：
LAN Yinzai;CHEN Zezhong;PENG Haixiong;QIANG Zhizhen;LI Peng;WEN Yang;WANG Xiaoteng;China North Engine Research Institute (Tianjin);
关键词：
Orthogonal test design;;Cylinder liner;;Deformation;;Finite element method;;Diesel engine
摘  要：
The influence of design factors on cylinder liner deformations and relationship among them are investigated. The bolt preload force,distance of the bolt and cylinder bore center and sinkage of the bolt are selected as the investigation factors. Finite element model of the assembly consisting of cylinder head,cylinder gasket,cylinder liner and block is set up. The cylinder linear deformation and minimum principal stress of the model are calculated through 16 computational schemes based on orthogonal test design theory. Influence of the above three factors on the three sections deformation of cylinder liner and minimum principal stress are analyzed according to the calculation results. Calculation results show that choosing appropriate sinkage of the bolt is the most important factor to decrease the deformations and stress in cylinder liner,decreasing the bolt preload force is the second factor on assuring seal condition,changing distance of the bolt and cylinder bore center has relatively less influence on the change of deformations and stress in cylinder liner.

相似文章

导出引用
计量
文章访问数: 11
HTML全文浏览量: 0
PDF下载量: 1

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46