当前位置: 首页 > 文章 > 土壤切削大变形的三维数值仿真 农业机械学报 2007,38 (4) 118-121
Position: Home > Articles > Study on 3-D Numerical Simulation for Soil Cutting with Large Deformation Transactions of the Chinese Society for Agricultural Machinery 2007,38 (4) 118-121

土壤切削大变形的三维数值仿真

作  者:
丁峻宏;金先龙;郭毅之;汤华;杨洪杰
单  位:
上海隧道工程股份有限公司技术中心;上海交通大学机械与动力工程学院
关键词:
盾构;土壤;切削;大变形;有限元分析
摘  要:
对近年来有关土壤切削仿真的研究进行总结,并介绍自适应网格划分、ALE以及SPH等3种解决大变形的方法;在此基础上,针对一个简化的切削模型,对3种方法进行土壤切削仿真的结果进行分析和比较;最后着重以某室内模型盾构刀盘刀具和上海地区软粘土,利用ALE方法进行盾构刀盘刀具的大规模三维切削仿真分析。仿真计算基于LS-DYNA970MPP软件和“曙光4000A”超级计算机,结果表明,3种不同的方法在解决土壤切削大变形时各有特点,其中ALE方法在更为细致的软粘土盾构三维开挖仿真中得到的结果与试验数据较为一致。
译  名:
Study on 3-D Numerical Simulation for Soil Cutting with Large Deformation
作  者:
Ding Junhong1 Jin Xianlong1 Guo Yizhi1 Tang Hua1 Yang Hongjie2(1.Shanghai Jiao Tong University 2.Shanghai Tunnel Engineering Construction Co., Ltd.)
关键词:
Shield, Soil, Cutting, Large deformation, Finite element analysis
摘  要:
A review of the research on soil cutting in recent years was given, and three different methods for dealing with large deformation in soil cutting including adaptive meshing method, arbitrary Lagrangian-Eulerian(ALE) method, and smoothed particle hydrodynamics(SPH) method were introduced. Based on these three methods, a simplified 3-D finite elements model was then constructed for simulation of soil cutting by the shield cutter. After that, with an emphasis laid on the ALE method, a full 3-D finite element model has been constructed for simulation of soil cutting by the shield cutter head and cutter. Final calculation was accomplished by using LS-DYNA 970 MPP software on the DAWNING 4000A supercomputer. Calculation results showed different characteristics of these three methods when dealing with the large deformation in soil cutting through corresponding analysis and comparison. Meanwhile, it is also found that some simulation results such as moment in soil cutting by the shield cutter head and cutter were in good accordance to the experimental data.

相似文章

计量
文章访问数: 11
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊