当前位置: 首页 > 文章 > 两垄四行花生联合收获机横向输送装置的设计与试验 农机化研究 2016,38 (5) 83-86+91
Position: Home > Articles > Design and Experiment of the Transverse Delivery Mechanism in the Two- ridges and Four- lines Peanut Combine Harvester Journal of Agricultural Mechanization Research 2016,38 (5) 83-86+91

两垄四行花生联合收获机横向输送装置的设计与试验

作  者:
原鲁明;王东伟;尚书旗
单  位:
青岛农业大学机电工程学院
关键词:
花生联合收获机;两垄四行;横向输送;刮板
摘  要:
为解决目前两垄四行花生联合收获机中清选装置重复设置的问题,设计了一种横向输送装置,用以实现花生果在夹持输送工序后的汇集,进而落入同一清选装置完成荚果与杂质的分离,达到节省资源降低功耗的目的。该装置主要由联轴器、轴、轴承座、链轮、链条、刮板、栅条底板和机具护罩等组成。同时,通过试验与分析确定了输送装置刮板的最优结构参数:刮板高度42mm,刮板安装角度70°,刮板长度650mm。优化后的输送装置作业效果明显提高。
译  名:
Design and Experiment of the Transverse Delivery Mechanism in the Two- ridges and Four- lines Peanut Combine Harvester
作  者:
Yuan Luming;Wang Dongwei;Shang Shuqi;College of Mechanical and Electrical Engineering,Qingdao Agricultural University;Shandong Provincial Engineering Technology Research Center for Rootstalk Crop Production Equipment;
关键词:
peanut combine harvester;;two-ridges and four-lines;;transverse delivery mechanism;;scraper
摘  要:
In order to solve the problem that the present two- ridges and four- lines peanut combine harvester with duplication cleaning mechanisms,this paper design a transverse delivery mechanism to realize the peanut to transport together then fall into the same cleaning device to complete the separation of pod and impurities,and to achieve the purpose of saving resources. this device is made up of coupling shaft bearing sprocket chain scraper grids and shells. optimize the structure and test analysis. Through the analysis of experimental data and processing,the scraper of the device determined the best structure and operating parameters: the height of the scraper is 42 mm,the angle of it is 70°,the length is650 mm. After optimizing the quality of this device working improve significantly.

相似文章

计量
文章访问数: 11
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊