中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 基于机载LiDAR落叶松树冠几何形状三维重建关键技术研究 西北林学院学报 2015,30 (2) 186-190
Position: Home > Articles > Key Technologies of Three-dimensional Geometric Reconstruction of Larch Crown Shape Based on LiDAR Data Journal of Northwest Forestry University 2015,30 (2) 186-190

基于机载LiDAR落叶松树冠几何形状三维重建关键技术研究

作  者：
赵晨阳;邢艳秋;霍达;焦义涛;尤号田
单  位：
东北林业大学森林作业与环境研究中心
关键词：
小光斑激光雷达;K-means;单木参数;冠幅形状;三维重建
摘  要：
森林冠层的三维重建研究能够更加直观反映森林空间结构,提高森林参数的测量精度。目前小光斑激光雷达已经广泛应用于林业研究中。为建立落叶松树冠三维形状模型,以长春净月潭实验区落叶松机载LiDAR(LiDAR,Light Detection And Ranging)数据为基础,采用K-means算法提取建模参数。该算法以单木树冠顶点作为初始聚类中心,经过4次迭代估测出单木树高和单木树冠直径,通过与试验区的单木实测数据对比,进行相关性分析,得到估测树高和估测树冠与实测数据相关系数分别为0.892 4和0.769 0,经过验证,估测树高和估测树冠的精度为94.06%和82.21%。利用激光雷达提取出的单木坐标、树高、树冠和冠基高采用旋转抛物线方法重建森林尺度三维模型呈现森林结构。
译  名：
Key Technologies of Three-dimensional Geometric Reconstruction of Larch Crown Shape Based on LiDAR Data
作  者：
ZHAO Chen-yang;XING Yan-qiu;HUO Da;JIAO Yi-tao;YOU Hao-tian;Center for Forest Operations and Environment,Northeast Forestry University;
关键词：
airborne Lidar;;K-means;;individual tree parameter;;canopy shape;;3D reconstruction
摘  要：
The research on forest three-dimensional reconstruction can response forest structure intuitively and improve estimation precision of forest parameters.At present,the small footprint LiDAR has been widely used in forest study.To establish the three-dimensional model of larch based on its canopy shape,the field measured data of larch at Jingyuetan area in Changchun and airborne LiDAR data were selected,and the K-means cluster algorithm was used to extract the modeling parameters,in which the individual tree top was taken as the initial clustering center,and individual tree height and crown diameter were estimated after four iteration procedures.Regression analysis were made between the field measured individual tree height and crown diameter and LiDAR measured individual tree height and crown diameter,resulting in the corresponding correlation coefficients of 0.892 4 and 0.769 0,and the precisions of 94.06% and 82.21%,respectively.Finally,the 3D model to represent forest structure was established by using the parameters such as the LiDAR measured individual tree top coordinate,tree height,crown diameter,crown base height and a rotating parabolic method.

相似文章

导出引用
计量
文章访问数: 10
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46