当前位置: 首页 > 文章 > 基于ANSYS的播种机牵引梁模态分析 农机化研究 2010,32 (6) 86-88+92
Position: Home > Articles > Modal Analysis of Drag-bar of Planter Based on ANSYS Journal of Agricultural Mechanization Research 2010,32 (6) 86-88+92

基于ANSYS的播种机牵引梁模态分析

作  者:
马颖;李成华;张国梁;杨宇;张晓冬
单  位:
河北农业大学;沈阳理工大学;沈阳农业大学
关键词:
播种机;牵引梁;ANSYS;模态分析
摘  要:
运用Pro/E对2BQ-2型精密播种机牵引梁进行三维建模,并利用ANSYS Workbench软件对播种机牵引梁结构进行模态分析,求解出牵引梁结构的模态参数,确定了牵引梁的固有频率和振型特征。在0~1Hz内,牵引梁的模态频率较密集,是影响牵引梁振动的主要区域,当外加激励频率与牵引梁固有频率相同时发生共振,引起播种质量下降;当牵引梁以0.237Hz的频率振动时,牵引梁将进行摆振,研究结果为牵引梁的优化设计提供了参考依据。
译  名:
Modal Analysis of Drag-bar of Planter Based on ANSYS
作  者:
Ma Ying1,Li Chenghua2,Zhang Guoliang3,Yang Yu1,Zhang Xiaodong1 (1. College of Engineering,Shenyang Agricultural University,Shenyang 110161,China; 2. Mechanical Engineering Department,Shenyang Ligong University,Shenyang 110168,China; 3. College of Forestry,Agricultural University of Hebei,Baoding 071000,China)
关键词:
planter; drag-bar;ANSYS; modal analysis
摘  要:
Three-dimensional model of drag-bar for 2BQ-2 planter was developed through Pro/E,the model was then transferred into ANSYS for analysis,and modal parameters of the drag-bar were calculated,natural frequency and vibration features of the drag-bar were determined. Modal frequency was concertrated in 0-1Hz which was main vibration band,and planting quality would be negatively affected when sympathetic vibration occurred as outside inspire frequency in accordance with natural vibration frequence of the drag-bar. The drag-bar would be in pendulum vibration when vibration frequency was at 0. 23Hz. The results of the study provided reference for optimization design of the dragbar of the planter.

相似文章

计量
文章访问数: 11
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊