中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 不同CNF添加量对CNC气凝胶结构与性能的影响 东北林业大学学报 2018 (8) 91-96
Position: Home > Articles > Effects of Different CNF Additions on Structure and Properties of CNC Aerogel Journal of Northeast Forestry University 2018 (8) 91-96

不同CNF添加量对CNC气凝胶结构与性能的影响

作  者：
张天蒙;张洋;江华;刘双;姚远;王晓宇
关键词：
纤维素纳米晶体;纤维素纳米纤丝;气凝胶
摘  要：
采用硫酸水解法制备纤维素纳米晶体(CNC),并通过悬浮滴定、叔丁醇置换和冷冻干燥制备球形纤维素气凝胶(CNCa)。为了提高CNCa的性能,将化学预处理结合机械研磨法制备得到的纤维素纳米纤丝(CNF),添加到CNC悬浮液中,最后制得CNC/CNF混合气凝胶。采用透射电镜、X-射线衍射仪观察纤维素的形态和结晶度,利用扫描电镜、傅里叶红外光谱仪、比表面积分析仪、万能力学试验机对气凝胶的微观形貌、化学态、比表面积及压缩性能进行表征。结果表明:CNC与CNF的尺寸、形态和结晶度均有差异;CNCa内部纤丝无序交联,比表面积达96.67 m2/g;在80%应变下,压缩强度为0.148 MPa。添加CNF,气凝胶直径随之增加,形态由"球形"趋向"米粒状";当CNF添加量为25%时,内部孔隙丰富,比表面积增至134.41 m2/g,压缩强度增至0.221 MPa。CNF的添加未对CNC气凝胶的化学官能团和晶型结构产生影响;但CNF添加量过大时,气凝胶各项性能均减弱。
译  名：
Effects of Different CNF Additions on Structure and Properties of CNC Aerogel
作  者：
Zhang Tianmeng;Zhang Yang;Jiang Hua;Liu Shuang;Yao Yuan;Wang Xiaoyu;Nanjing Forestry University;
单  位：
Zhang Tianmeng%Zhang Yang%Jiang Hua%Liu Shuang%Yao Yuan%Wang Xiaoyu%Nanjing Forestry University
关键词：
Cellulose nanocrystal;;Cellulose nanofibril;;Aerogel
摘  要：
Cellulose nanocrystals( CNC) were prepared by sulfuric acid hydrolysis and spherical cellulose aerogels( CNCa)were prepared by suspension titration,tert-butanol displacement and freeze-drying. In order to improve the performance of CNCa,the chemical pretreatment was combined with the mechanical grinding method to prepare the cellulose nanofibril(CNF),which was added to the CNC solution,and finally the CNC/CNF mixed aerogel was made. Transmission electron microscopy and X-ray diffraction were used to observe the morphology and crystallinity of cellulose. The microstructure,chemical state,specific surface area and compression properties of aerogel were characterized by scanning electron microscope,Fourier infrared spectrometer,specific surface area analyzer and universal mechanical testing machine. The size,shape and crystallinity of CNC and CNF were different. CNCa internal filodex crosslinking,with a specific surface area of96.67 m~2/g,with a compression strength of 0.148 MPa under 80% strain. With the addition of CNF,the diameter of the aerogels increased with the morphology from"spherical"to"rice-like",when CNF was added to 25%,the internal porosity was rich,and the specific surface area increased to 134.41 m~2/g,and the compression strength increased to 0.221 MPa.The addition of CNF did not affect the chemical functional groups and crystal structure of the CNC aerogel. However,the performance of aerogel was reduced when the CNF was too large.

相似文章

导出引用
计量
文章访问数: 12
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46