当前位置: 首页 > 文章 > 涂布率对干法再造烟叶品质的影响 河南农业科学 2015,44 (1) 149-153
Position: Home > Articles > Influence of Coating Rate on the Properties of Air-laid Processs Tobacco Sheet Journal of Henan Agricultural Sciences 2015,44 (1) 149-153

涂布率对干法再造烟叶品质的影响

作  者:
靖德军;邓志斌;刘刚;饶国华;周瑾;刘熙;曾健;梅建华
单  位:
广东省金叶科技开发有限公司;广东中烟工业有限责任公司
关键词:
烟草薄片;干法再造烟叶;涂布率;品质
摘  要:
为确定干法再造烟叶合理的涂布率,分别设计50.00%、66.67%、75.00%、80.00%、83.33%5个理论涂布率,探讨不同涂布率对干法再造烟叶品质的影响。结果表明:随着涂布率的升高,干法再造烟叶的定量、厚度和抗张强度逐渐升高,而松厚度和填充值则逐渐降低;总糖、还原糖、烟碱、硝酸盐、钾和氯的含量均成比例升高;烟气指标中的总粒相物(TPM)、烟气烟碱、焦油和CO释放量也逐渐升高;感官质量先迅速升高而后趋于平缓。最终确定干法再造烟叶最适宜的涂布率为80%左右。
译  名:
Influence of Coating Rate on the Properties of Air-laid Processs Tobacco Sheet
作  者:
JING Dejun;DENG Zhibin;LIU Gang;RAO Guohua;ZHOU Jin;LIU Xi;ZENG Jian;MEI Jianhua;Guangdong Golden Leaf Technology Development Co.,Ltd.;China Tobacco Guangdong Industrial Co.,Ltd.;
关键词:
tobacco sheet;;air-laid process tobacco sheet;;coating rate;;property
摘  要:
The influence of coating rate on the properties of air-laid process tobacco sheet was discussed by five theoretical levels(50.00%,66.67%,75.00%,80.00% and 83.33%) so as to determine a reasonable coating rate.The results showed that,with the increasing of the coating rate in the product,its quantitation,thickness,tensile strength went up gradually,while the bulk,filling value reduced by degrees; its total sugar,reducing sugar,nicotine,nitrate,potassium and chloride showed a linear rise; the release amount of TPM,nicotine,Tar,CO showed a regular increasement; the sensory quality level went up rapidly and then became flat.The optimum coating rate was finally determined as 80% or so.

相似文章

计量
文章访问数: 4
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊