当前位置: 首页 > 文章 > 水稻芽种物理特性试验研究 农机化研究 2015 (1) 209-212+222
Position: Home > Articles > Study on Physical Characteristics of Rice Budded Seeds Journal of Agricultural Mechanization Research 2015 (1) 209-212+222

水稻芽种物理特性试验研究

作  者:
李衣菲;郭占斌;陶桂香;王睿晗;刘海燕;冯金龙
单  位:
黑龙江八一农垦大学工程学院
关键词:
水稻芽种;物理特性;试验
摘  要:
通过对黑龙江省常用水稻品种空育131、垦鉴稻6、垦稻12、龙粳26芽种的几何尺寸、千粒质量、休止角和自流角进行试验,测试分析了相同和不同含水率条件下物理特性的分布范围和变化趋势。研究表明,在含水率25%时,芽种的几何尺寸服从正态分布,长度主要分布在6.9~7.4mm之间,宽度主要分布在3.6~4.2mm之间,厚度主要分布在2.3~2.7mm之间;千粒质量分布在36~41g之间;滑动摩擦角分布在26°~33°之间;休止角分布在21.5°~23.1°之间。在不同含水率下,水稻芽种的几何尺寸、千粒质量、休止角、自流角均随含水率的增加而增大。试验对芽种物理特性有更深入地了解,结论可为播种机的设计奠定基础。
译  名:
Study on Physical Characteristics of Rice Budded Seeds
作  者:
Li Yifei;Guo Zhanbin;Tao Guixiang;Wang Ruihan;Liu Haiyan;Feng Jinlong;Collage of Engineering,Heilongjiang Bayi Agricultural University;
关键词:
rice bud seed;;physical characteristics;;test
摘  要:
The parameters of geometrical size,the 1000- grain weight,caesural angle,glide friction angle of Longjing26,kenjiandao 6,Kongyu 131 and kendao12 four species of rice budded seeds were tested. The results showed the span range between 6. 9mm- 7. 4mm in length,3. 6mm- 4. 2mm in width and 2. 3mm- 2. 7mm in height. Their geometrical size,the 1000- grain weight,caesural angle,glides friction angle increase with the increase of moisture. These parameters could be used as the basis of designing seeding machines.

相似文章

计量
文章访问数: 10
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊