当前位置: 首页 > 文章 > 高强度灰铸铁在薄壁缸体上的应用 农业机械学报 2002,33 (5) 101-105
Position: Home > Articles > Researches on Application of High Strength Gray Iron in Thin Wall Cylinder Blocks Transactions of the Chinese Society for Agricultural Machinery 2002,33 (5) 101-105

高强度灰铸铁在薄壁缸体上的应用

作  者:
司乃潮;孙少纯;付明喜;周永寿;胡丽云;杨均强
单  位:
一汽无锡柴油机厂;江苏大学材料学院;一汽无锡柴油机厂 212013 镇江市
关键词:
灰铸铁;高强度;缸体;耐磨性
摘  要:
采用扫描电镜、2 0 0 h台架试验和 10 0 0 h耐久试验等方法对高强度灰铸铁在薄壁缸体上的应用进行了试验研究。试验结果表明 :碳当量控制在 3.8%~ 4 .1% (与菲亚特缸体的碳当量大体相当 ) ,采用低合金化及复合孕育剂 ,可稳定获得抗拉强度大于 2 5 0 MPa的高强度灰铸铁 ,其铸件硬度大于 HB2 10 ,白口倾向小 ,硬度差仅为HB15~ HB33,均达到菲亚特缸体的性能要求。对无缸套缸体的缸壁表面进行激光处理 ,比传统缸套的耐磨性提高一倍以上。
译  名:
Researches on Application of High Strength Gray Iron in Thin Wall Cylinder Blocks
作  者:
Si Naichao Sun Shaochun Fu Mingxi(Jiangsu University) Zhou Yongshou Hu Liyun Yang Junqiang(Wuxi Diesel Engine Works)
关键词:
Gray iron, High strength, Cylinder block, Wear resistance
摘  要:
Different complex inoculants, small amount alloy elements, scan electric microscope, operation test for 200 hours, and durability test for 1000 hours were used to research the application of high strength gray iron in thin wall cylinder blocks. Experiment results showed that controlling carbon equivalent in the range of 3 8%~4 1%, adding a small amount of alloy elements, and using complex inoculant could produce high strength gray iron with tensile strength more than 250 MPa. The cylinder castings produced had more than HB210 hardness and little chilling proneness. The hardness difference in the casting was only HB15~HB33. All properties of the castings could meet the technologic requirements for advanced cylinder blocks made abroad. The cylinder line could be omitted by the laser treatment of the cylinder inner surface. After laser treatment the surface could have more than twice wear resistance as high as traditional cylinder line.

相似文章

计量
文章访问数: 6
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊