当前位置: 首页 > 文章 > 基于多视角图像的植物叶片建模与曲面面积测量 农业机械学报 2013,44 (7) 229-234
Position: Home > Articles > Plant Leaf Modeling and Surface Area Measuring Based on Multi-view Images Transactions of the Chinese Society for Agricultural Machinery 2013,44 (7) 229-234

基于多视角图像的植物叶片建模与曲面面积测量

作  者:
张卫正;徐武峰;裘正军;吴翔;吴武豪;何勇
单  位:
浙江大学生物系统工程与食品科学学院;许继集团许继电源有限公司
关键词:
植物叶片;面积测量;图像处理;相机校正;曲面建模
摘  要:
针对现有测量植物叶片面积方法会对叶片造成一定程度的损伤,提出一种直接对自然生长状态下的叶片进行测量的方法。首先,对数码相机进行校正获取相机参数,从多角度拍摄自然生长状态下的叶片;然后,利用PhotoModeler软件对图像进行处理,获得叶片三维点云模型;再利用Matlab编程实现叶片的三维曲面建模并计算曲面面积。将该测量结果与采用扫描仪结合Photoshop测量结果进行了对比,实验结果表明,提出的方法对自然状态下的叶片测量效果良好,精度达99%。
译  名:
Plant Leaf Modeling and Surface Area Measuring Based on Multi-view Images
作  者:
Zhang Weizheng1 Xu Wufeng2 Qiu Zhengjun1 Wu Xiang1 Wu Wuhao1 He Yong1(1.School of Biosystems Engineering and Food Science,Zhejiang University,Hangzhou 310058,China 2.XJ Group Corporation XJ Power Co.,Ltd.,Xuchang 461000,China)
关键词:
Plant leaf Area measurement Image processing Camera calibration Surface modeling
摘  要:
The existing methods of leaf area measuring would cause certain damage to the leaf,so a measurement method of the leaf area in natural growing state was put forward.The digital camera was calibrated to get camera parameters;then leaf images at various angles in natural growing state were shot and processed by PhotoModeler software.The 3-D point cloud model of leaf was built up.The 3-D surface modeling and surface area calculating of leaf were achieved by using Matlab software.The measuring results and the calculating results with combination method of scanner and Photoshop software were compared.It showed that the accuracy of calculating results reached to 99%.

相似文章

计量
文章访问数: 7
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊