当前位置: 首页 > 文章 > 汽车驱动桥壳静动态有限元分析 农业装备与车辆工程 2011 (9) 48-51+63
Position: Home > Articles > Finite Element Analysis on Static and Dynamic of Vehicle Drive Axle Housing Agricultural Equipment & Vehicle Engineering 2011 (9) 48-51+63

汽车驱动桥壳静动态有限元分析

作  者:
高伟;宋萌
单  位:
湖北汽车工业学院汽车工程系
关键词:
驱动桥壳;有限元分析;强度;模态
摘  要:
利用catia软件建立了某货车驱动桥壳三维模型,运用有限元分析的方法,在ANSYS Workbench软件中建立了驱动桥壳的有限元模型,分析了驱动桥壳在四种典型工况下的结构强度。并对桥壳进行了模态分析,计算了在自由状态下的前12阶固有频率和振型。分析结果表明,桥壳的强度满足设计的要求,具有较好的抗振性。
译  名:
Finite Element Analysis on Static and Dynamic of Vehicle Drive Axle Housing
作  者:
Gao Wei,Song Meng(Department of Automobile Engineering,Hubei Institute of Automotive Technology,Shiyan 442002,China)
关键词:
drive axle housing;finite element analysis;strength;modal
摘  要:
The three-dimensional model of truck drive axle housing was established by using catia software.The finite element model was built in ANSYS Workbench software by applying finite element analysis method.The structural strength of the drive axle housing in four typical operating conditions was analyzed.And the modal analysis of drive axle housing was carried on in ANSYS Workbench software.In the free state,the first 12 natural frequencies and mode shapes were calculated.The results indicate that the strength of drive axle housing satisfies the static design request and with good vibration resistance.

相似文章

计量
文章访问数: 9
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊