当前位置: 首页 > 文章 > 加热器起燃过程数值模拟及其结构的改进 农业机械学报 2005,36 (4) 45-47+59
Position: Home > Articles > Numerical Simulation of the Heater Starting Process and the Modification of the Chamber Transactions of the Chinese Society for Agricultural Machinery 2005,36 (4) 45-47+59

加热器起燃过程数值模拟及其结构的改进

作  者:
王希波;李国祥;邓康耀;徐秀兰
单  位:
山东大学能源与动力工程学院;上海交通大学机械与动力工程学院
关键词:
加热器;燃烧过程;数值模拟;结构设计
摘  要:
为了提高加热器的工作性能,对汽车YJQ 32 / 2型加热器启动过程的流动、喷雾和燃烧进行了数值模拟分析。根据模拟结果进行了加热器的改进。试验表明改进后的加热器低温点火能力明显提高,启动过程的碳烟排放水平显著降低。根据数值模拟结果给出了一种改进火焰筒的方案。
译  名:
Numerical Simulation of the Heater Starting Process and the Modification of the Chamber
作  者:
Wang Xibo 1 Li Guoxiang 2 Deng Kangyao 1 Xu Xiulan 2 (1 Shanghai Jiao Tong University 2 Shandong University)
关键词:
Heater, Combustion processes, Numerical simulation, Structural design
摘  要:
Numerical simulations of the flow, spray and combustion in the starting process of the heater have been done. The simulation results indicated that fuel vapor density around the spark plug was thin. It was also found by the simulation that the soot was mainly formed near the inlets where the fuel/air ratio was high. According to the simulation results, the spark plug was moved near to a thick place and small holes were made on the inlets to strengthen the air/fuel mixing near the inlets. The experiments found that the modification of the ignition place improved the cool-start ability and the added small holes reduced the soot emission during the starting process. Based on the temperature field that was gotten from the simulation, a method to improve the durability of the chamber was given.

相似文章

计量
文章访问数: 8
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊