中国农业科学院农业信息研究所 中国农学会
Agricultural Information Institute of CAAS China Association of Agricultural Science Societies
En
Ch
中国农业科学院农业信息研究所 中国农学会 主办

AI检索

订阅

返回顶部
当前位置: 首页 > 文章 > 制丝工艺参数对烟叶叶丝耐加工性和填充值的影响 河南农业科学 2015 (8) 145-148
Position: Home > Articles > Effects of Primary Processing Parameters on Processing Characteristics and Filling Power of Cut Tobacco Journal of Henan Agricultural Sciences 2015 (8) 145-148

制丝工艺参数对烟叶叶丝耐加工性和填充值的影响

作  者：
刘国栋;王旭锋;李向阳
单  位：
陕西中烟工业有限责任公司澄城卷烟厂
关键词：
烟丝;制丝工艺参数;正交试验;耐加工性;填充值
摘  要：
为提高低档卷烟的耐加工性,提高卷制质量,选取制丝工艺参数中对叶丝耐加工性(叶丝整丝率变化率、弹性)和填充值影响较大的参数(切丝宽度、叶丝回潮出口含水率、烘丝机工艺气体流量),采用单因素试验和正交试验的方法研究了其对叶丝整丝率变化率、填充值和弹性的影响。结果表明:在试验范围内,随着叶丝回潮出口含水率的增加,叶丝整丝率变化率呈先升高后降低趋势;随着叶丝切丝宽度的增加,叶丝填充值呈逐渐增大趋势;随着烘丝机工艺气体流量的增加,叶丝弹性呈先升高后降低趋势。切丝宽度对叶丝填充值有显著影响,叶丝回潮出口含水率对整丝率变化率有显著影响。优化后较适宜的制丝工艺参数组合为切丝宽度1.11 mm,叶丝回潮含水率25%,烘丝机工艺气体流量14 500 kg/h。优化后叶丝整丝率变化率较优化前提高了2.01个百分点,叶丝填充值提高了0.15 cm3/g,叶丝弹性提高1.1个百分点。
译  名：
Effects of Primary Processing Parameters on Processing Characteristics and Filling Power of Cut Tobacco
作  者：
LIU Guodong;WANG Xufeng;LI Xiangyang;Chengcheng Cigarette Factory,China Tobacco Shaanxi Industrial Co.,Ltd.;
关键词：
cut tobacco;;primary processing parameters;;orthogonal experiment;;processing characteristics;;filling power
摘  要：
In order to improve the processing characteristics and the rolling quality of cigarettes,the effects of primary processing parameters on the processing characteristics and filling power of cut strips were investigated with single factor experiment and orthogonal experiment. The results showed that,within the test range,the changing rate of the ratio of complete cut tobacco showed a trend of increasing first and then reducing with the increase of moisture content of cut tobacco resurgence,the filling power increased with the increase of cut width,the elasticity of cut strips showed a trend of increasing first and then reducing with the increase of process gas flow rate of dryer. There were significant correlations between cut width and filling power. There were significant correlations between regain moisture content and the changing rate of the ratio of complete cut tobacco. The appropriate parameters were cut width of 1. 11 mm,moisture content of cut tobacco resurgence of 25%,process gas flow rate of dryer of 14 500 kg / h. After optimization,the changing rate of the ratio of complete cut tobacco increased by 2. 01 percentage points,the filling value raised by 0. 15 cm3/ g,the elasticity increased by 1. 1 percentage points.

相似文章

导出引用
计量
文章访问数: 12
HTML全文浏览量: 0
PDF下载量: 0

所属期刊

推荐期刊

友情链接Friendly link
农业信息研究所Agricultural information institute 农业智能知识服务平台Agricultural intelligent knowledge service platform 农业学术服务平台Agricultural Knowledge Service System 中国知网CNKI 维普网VIP 万方WANFANG DATA
联系我们Contact us

电话Tell：010-82109652-808

邮箱E-mail：agrijournal@caas.cn

服务Service
关于我们About us 意见建议Opinions and suggest
版权说明Copyright
单位：中国农业科学院农业信息研究所 中国农学会 © 2017中国农业科学院农业信息研究所 ICP备案号：京ICP备09089781号-46